Scalable BESS Solar Battery Energy Storage 232 KWh With Multiple Safeguards
2. Air or liquid cooling systems
The Scalable BESS Solar Battery Energy Storage 232 KWh With Multiple Safeguards, Installing a battery energy storage system for industry solar will reduce your carbon footprint and save electricity bills. It is an all-in-one BESS that features kinds of components, such as the battery unit, battery management system (BMS), inverter, power control system (PCS), energy management system (EMS), cooling/ safety/communication systems, etc. Those parts work together to offer a comprehensive solution for applications. The off grid BESS solar battery energy storage system is a perfect backup for remote regions where no grid is reached, storing power from the sun and using it in the evening or in emergencies.
Parameter
|
System Parameters |
||
|
Rated AC Power |
250KW/500KW | 500KW/1000KW |
| Rated AC Voltage |
400V |
|
| Rated AC Current |
360A/720A |
720A/720A*2 |
| THD | <3%(Linear load) | |
| PF Adjustable Range | -1(leading) ~ +1(lagging) | |
|
Battery Cell Specification |
3.2V/120Ah; 3.2V/280Ah |
|
| Battery Cell cycle Life |
>6000 cycls@0.5C, 25℃ |
|
|
Available Rated Capacity |
500KWh/1000KWh | 500KWh/1000KWh |
|
Type |
Modular, High efficiency three level | |
|
Protection |
Over temperature, low temperature charging, over current, short circuit, over voltage, under voltage, DC bus protection, tec. |
|
| Connection Mode | Three phase three wire/three phase four wire | |
| Isolation Transformer | Equipped(optional) | |
| Working Mode | Grid-tied peak shaving/off-grid power supply guarantee | |
| General Parameters | ||
| Dimension(W*D*H) | 6058*2438*2896mm | 12196*2438*2896mm |
| Weight | 18 tons | 35 tons |
| IP Grade | IP55 | |
| Operating Temperature | -25℃ ~ 60℃(Derating>45℃) | |
| Relative Humidity | 0 ~ 95%(non-condensing) | |
| Altitude | 3000m(>3000m Derating) | |
| Fire Extinguishing System | FM200 pipe fire extinguishing system | |
| Cooling System | Air cooling / Liquid cooling | |
| Communication Interface/Protocol | RS485, Ethernet/Modbus RTU, Modbus TCP | |
Product Features
1. We can do large capacity up to MWh
2. Advanced battery management systems offer protections
3. Modular design, can add more power with the same modules
4. Highly integrated, packed with battery packs, PCS, BMS, EMS, UPS and protection systems
Battery Cabinet Features
The Battery Cabinet Has The Following Features
Versatile Functionality
1) Supports peak shaving,valley filing,demand-side response,backup
power supply and other major functions;
2) Supports remote update of operating strategies and firmware
upgrades, lower operation and maintenance costs.
Highly Integrated
1) System productization,integrating energy storage batteries,PCs and power distribution,temperature control fire protection,water-
immersed door sensors and monitoring communications,to fuly
control the system operating status and risks;
2) One-stop delivery,shortening the project site installation and commissioning cycle.
Safe And Smart
1) Fault hierarchical processing mechanism to respond to preset fault Scenarios;
2) Customized BMs,providing complete measurement and protection functions;
3) Support cloud scheduling and operational report analysis.
Fexible and Convenient
1) Modular Pcs,linearexpansion battery unit and energy storagebidirectional inverter unit;
2) Equipped with independent charge and discharge control capabilities for multiple sets of batteries to improve battery utilization and safety.
Energy Storage System Capacity Planning and Matching Principles
Energy storage capacity must be calculated based on the PV plant's peak power, load demand, and storage duration. The formula is: Energy Storage Capacity (kWh) = System Efficiency PV Peak Power (kW) × Storage Duration (h)
For example, a 10MW PV plant equipped with 2-hour energy storage, assuming an 85% system efficiency, requires approximately 23.5MWh of storage capacity. Furthermore, the principle of "stability first, economical balance" must be adhered to. The energy storage ratio (typically 10%-30% of the PV capacity) should be determined through load curve analysis to avoid over-configuration and resulting cost redundancy.
High degree of modularity, simple structure, easy to install and maintain; Integrate independently developed BMS products for realtiem monitoring and management.
Certificates
About us
FAQ
Q：In which market do you primarily operate?
A： Our products are shipped globally, mainly in Europe, North America, Australia and Asia.
Q：How can I obtain the price list for your products?
A：For a detailed price list, please provide us with your preference products and quantity ,we'll get back to you promptly with the requested information.
Q：What is the cost estimate for the battery?
A：The cost of the battery is determined by its type and quantity. Our aim is to provide customers with the best quality products at the most affordable price, so we offer competitive quotes to meet your needs.
You might also like
Hot Tags: scalable bess solar battery energy storage 232 kwh with multiple safeguards, China scalable bess solar battery energy storage 232 kwh with multiple safeguards manufacturers, suppliers, factory
You Might Also Like
Commercial And Industrial 232 KWh Lithium Ion Batter...
Liquid Cooling System High IP Level Outdoor Battery ...
Container Size 232kWh Battery For Energy Storage C&I...
High-security Solar Energy Storage Battery Container...
Complete Container Battery Energy Storage System 0.2...
BESS Solar Power Energy Storage Battery For Commerci...
Send Inquiry