Flexible Used 2MWh Battery With EMS PCS Controller
2. Container system with kinds of systems for safety and durability
Factory in China cost-effective container energy storage battery with 40FT size, special for big commercial projects. It's designed to offer reliable and efficient energy storage. This container can store a large amount of electrical energy with high efficiency. Providing durable backup power for projects. The impressive 2 MWh battery ESS has multiple protections against anomalies. With these advanced technologies to address the problem in advance and control the battery under good conditions all the time. Flexible Used 2MWh Battery With EMS PCS Controller, not only ultra safe but also allows users to add/reduce the same module for different size capacities.
We support customized services. Depending on specific requirements, we can customize a suitable solution for your project, and make every power worth it.
Parameter
|
System Parameters |
||
|
Rated AC Power |
250KW/500KW | 500KW/1000KW |
| Rated AC Voltage |
400V |
|
| Rated AC Current |
360A/720A |
720A/720A*2 |
| THD | <3%(Linear load) | |
| PF Adjustable Range | -1(leading) ~ +1(lagging) | |
|
Battery Cell Specification |
3.2V/120Ah; 3.2V/280Ah |
|
| Battery Cell cycle Life |
>6000 cycls@0.5C, 25℃ |
|
|
Available Rated Capacity |
500KWh/1000KWh | 500KWh/1000KWh |
|
Type |
Modular, High efficiency three level | |
|
Protection |
Over temperature, low temperature charging, over current, short circuit, over voltage, under voltage, DC bus protection, tec. |
|
| Connection Mode | Three phase three wire/three phase four wire | |
| Isolation Transformer | Equipped(optional) | |
| Working Mode | Grid-tied peak shaving/off-grid power supply guarantee | |
| General Parameters | ||
| Dimension(W*D*H) | 6058*2438*2896mm | 12196*2438*2896mm |
| Weight | 18 tons | 35 tons |
| IP Grade | IP55 | |
| Operating Temperature | -25℃ ~ 60℃(Derating>45℃) | |
| Relative Humidity | 0 ~ 95%(non-condensing) | |
| Altitude | 3000m(>3000m Derating) | |
| Fire Extinguishing System | FM200 pipe fire extinguishing system | |
| Cooling System | Air cooling / Liquid cooling | |
| Communication Interface/Protocol | RS485, Ethernet/Modbus RTU, Modbus TCP | |
Product Features
1. Good investment, save lots of money in the long run.
2. Different capacities BESS to choose from.
3. Fit for big commercial projects.
4. Container design, easy for installation.
The scale of photovoltaic modules for energy storage systems has been determined
Calculate the required photovoltaic (PV) module power based on the load's electricity consumption and local solar resources. For example, if the load requires 20 kWh of electricity per day, the average daily sunshine duration is 5 hours, and the PV module's power generation efficiency is 15%, then the required PV module power can be calculated using a formula. At the same time, system redundancy should be considered; it is generally recommended to add a 10-20% power margin to cope with potential situations such as insufficient sunlight.
Installation Policy
Solar energy system products require professional technicians to install. For safety reasons, we do not recommend that customers install solar products themselves unless they are professional technicians.
We can provide technical support during the installation process. If you have any questions, please send us the relevant photos and videos for communication and check. We will provide online technical services in time.
High degree of modularity, simple structure, easy to install and maintain; Integrate independently developed BMS products for realtiem monitoring and management.
Certificates
About us
FAQ
Q：Can you describe your quality control process?
A： At our factory, we place great emphasis on quality control and have put in place a thorough process to ensure that every aspect of production, from obtaining raw materials to delivering the final product, meets the highest standards. Our ISO 9001 certification is evidence of this dedication. Before assembly, the battery cells undergo extensive examination and are carefully selected to guarantee only the best components are used. Prior to delivery, each batch undergoes aging tests to guarantee the optimal performance and longevity of the product.
Q：How does your battery ensure greater safety compared to others?
A：Our batteries are equipped with an advanced BMS system that monitors temperature, voltage, and current, providing protection against over-voltage, over-current, over-temperature, short-circuits, and reverse polarity.
Q：What is the proper method for storing batteries?
A：To ensure proper battery storage, it's recommended to avoid both deep discharging and prolonged charging, and to keep the battery in a environment that is not too hot or too cold for an extended period of time. Additionally, it's important to store the battery in a place where it will not be exposed to moisture.
You might also like
Hot Tags: flexible used 2mwh battery with ems pcs controller, China flexible used 2mwh battery with ems pcs controller manufacturers, suppliers, factory
You Might Also Like
Big Capacity 2MWh 500KW Battery Energy Storage Syste...
Industrial Battery Energy Storage Systems For High P...
Certified Safe Online 2MWh Battery ESS Energy Contai...
500KW 1000KW 2MWh Container Thermal Energy Storage E...
Advanced BMS Technology Home Power Station Safer And...
Portable Pocket Power Bank Charger For IPhone 15 IPh...
Send Inquiry