BESS 232 KWh Battery Bank With Multiple Protections
2. Consists of BMS, PCS, EMS, cooling system, anti-fire system, etc.
This BESS 232 KWh Battery Bank With Multiple Protections. The energy storage container has a rated energy of 232 kWh, in the cabinet, including BMS, PCS, EMS, LFP battery system, fire protection system, liquid cooling system, HV controller, power distribution, etc., providing various safeguards that last long lifespan, consumers can use it without any worries. The LCD shows battery status in real time so you can know the conditions all the time.
We not only can do home storage systems but also can do 100 megawatt battery storage for large commercial systems, with a professional team, we can figure your project out and offer a suitable solution at a reasonable cost.
Parameter
|
System Parameters |
||
|
Rated AC Power |
250KW/500KW | 500KW/1000KW |
| Rated AC Voltage |
400V |
|
| Rated AC Current |
360A/720A |
720A/720A*2 |
| THD | <3%(Linear load) | |
| PF Adjustable Range | -1(leading) ~ +1(lagging) | |
|
Battery Cell Specification |
3.2V/120Ah; 3.2V/280Ah |
|
| Battery Cell cycle Life |
>6000 cycls@0.5C, 25℃ |
|
|
Available Rated Capacity |
500KWh/1000KWh | 500KWh/1000KWh |
|
Type |
Modular, High efficiency three level | |
|
Protection |
Over temperature, low temperature charging, over current, short circuit, over voltage, under voltage, DC bus protection, tec. |
|
| Connection Mode | Three phase three wire/three phase four wire | |
| Isolation Transformer | Equipped(optional) | |
| Working Mode | Grid-tied peak shaving/off-grid power supply guarantee | |
| General Parameters | ||
| Dimension(W*D*H) | 6058*2438*2896mm | 12196*2438*2896mm |
| Weight | 18 tons | 35 tons |
| IP Grade | IP55 | |
| Operating Temperature | -25℃ ~ 60℃(Derating>45℃) | |
| Relative Humidity | 0 ~ 95%(non-condensing) | |
| Altitude | 3000m(>3000m Derating) | |
| Fire Extinguishing System | FM200 pipe fire extinguishing system | |
| Cooling System | Air cooling / Liquid cooling | |
| Communication Interface/Protocol | RS485, Ethernet/Modbus RTU, Modbus TCP | |
Energy Storage System Solutions and Implementation Steps
Requirements Analysis and System Design: We first work closely with our customers to understand their specific needs and constraints, such as energy requirements and budgetary constraints. Based on this information, we conduct system design and planning, including determining the required energy storage capacity and equipment configuration.
Equipment Procurement and Installation: We procure the necessary equipment and components based on the design plan and carry out installation and configuration. This phase also includes equipment layout planning, wiring installation, and system integration. Ensuring system safety and stability is also a key consideration.
Product Features
1. Powerful capacity for commercial systems.
2. Perfect for peak shaving and valley filling.
3. With various certificates for safety and durability.
4. Support DIY the suitable BESS for the system.
Installation Policy
Solar energy system products require professional technicians to install. For safety reasons, we do not recommend that customers install solar products themselves unless they are professional technicians.
We can provide technical support during the installation process. If you have any questions, please send us the relevant photos and videos for communication and check. We will provide online technical services in time.
High degree of modularity, simple structure, easy to install and maintain; Integrate independently developed BMS products for realtiem monitoring and management.
Certificates
About us
FAQ
Q：What is the reason for needing a home energy storage battery?
A： By installing a home energy storage battery, homeowners can enjoy both cost savings on their energy bills and peace of mind during power outages.
Having a storage battery in your home means that you can store electricity when it's available, and then use it when it's needed. This can help reduce your reliance on the grid, which can lead to lower energy bills. Additionally, if there is a power outage, you will still have access to electricity, as the stored energy in your battery can provide a backup power source.
Q：When can I expect to receive a quotation?
A：We generally respond to inquiries with a quote within 24 hours. If you require a quicker response, please let us know and we will prioritize your request.
Q：Where can we obtain product information?
A：To learn more about us, please visit BLOO POWER website.
You might also like
Hot Tags: BESS 232 KWh Battery Bank With Multiple Protections, China BESS 232 KWh Battery Bank With Multiple Protections manufacturers, suppliers, factory
You Might Also Like
Send Inquiry